Table of Contents
Advertisement
cnfprofelemvoice
pvoice-pkt-period
sid
Command Modes
Switched AAL2 PVC
Usage Guidelines
Use the dspaal2profile command to identify valid combinations of codec type, packetization period, and
SID.
The G.723.1 codecs are supported for VISM-PR cards and are not supported for VISM cards.
Examples
The following example shows that the ITU profile type on profile number 1 is configured with the
G.711a codec type, a packetization period of 5 ms, and VAD enabled:
cnfprofelemvoice 1 1 2 5 2
Related Commands
Command
cnfprofelemvbd
dspaal2profile
dspprofparams
Cisco VISM Installation and Configuration Guide
5-192
Packetization period (defined in milliseconds). It can be one of the following
values:
•
5
•
10
•
20
30
•
40
•
60
•
Silence insertion descriptor (SID). It can be one of the following values:
1 = VAD off
2 = VAD on
3= SID generic
4 = SID 729
5 = SID 723
Description
Configures the VBD profile element for a profile.
Displays information about a specified AAL2 profile type and profile number.
Displays the profile elements and preferences for all profiles.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
