Table of Contents
Advertisement
dsplnmusicthreshold
dsplnmusicthreshold
To display the music on-hold threshold values for the DS0s on a specified line, use the
dsplnmusicthreshold command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2
trunking operating modes.
Syntax Description
line-num
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the DS0s on VISM card line number 3 music on-hold threshold values
are displayed:
dsplnmusicthreshold 3
Ds0Num
------
1
2
.
.
.
Related Commands
Command
cnfds0musicthreshold
cnflnmusicthreshold
cnfmusicthreshold
dspds0musicthreshold
dspmusicthreshold
Cisco VISM Installation and Configuration Guide
5-370
dsplnmusicthreshold line-num
Line number for which you want to display the DS0 music on-hold
threshold values. It can be in the range from 1 to 8.
Musicthreshold
--------------
-38
-40
Description
Configures the music on-hold threshold for a specified DS0.
Configures the music on-hold threshold for all DS0s on a specified line.
Configures the music on-hold threshold value for the current VISM card.
Displays the music on-hold threshold value for a specified DS0.
Displays the music on-hold threshold values for the current VISM card.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
