Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 576

Voice interworking service module release 3.0
Table of Contents

Advertisement

dspsrcppeergrpparams
dspsrcppeergrpparams
To display the Simple Resource Control Protocol (SRCP) parameters for all call agent redundancy
groups that have SRCP added, use the dspsrcppeergrpparams command in the VoIP switching/trunking
and switched AAL2 PVC operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the SRCP parameters for all call agent redundancy groups that have
SRCP added are displayed:
dspsrcppeergrpparams
Mgc Grp Num HeartbeatIntv TimeSinceHeartbeat MaxPdu
----------- ------------- ------------------- ------
Related Commands
Command
addmgcgrpentry
addmgcgrpprotocol
cnfmgcgrpentry
cnfmgcgrpparam
cnfsrcppeer
cnfsrcppeergrpparam
delmgcgrpentry
delmgcgrpprotocol
dspmgcgrpparams
dspmgcgrpprotocols
dspmgcgrps
Cisco VISM Installation and Configuration Guide
5-432
dspsrcppeergrpparams
1
120
Description
Configures call agents as part of an MGC redundancy group and assigns a
priority value for a call agent.
Associates a call agent redundancy group to a gateway control protocol.
Modifies the call agent priority level of a call agent within a call agent
redundancy group.
Modifies a call agent redundancy group state change notification policy
and priority level.
Configures the SRCP parameters when SRCP is the selected protocol for
communication between the VISM card and call agent.
Modifies the SRCP heartbeat interval and maximum UDP size for a
specified call agent redundancy group.
Deletes a call agent from a call agent redundancy group.
Deletes an MGCP from a specified call agent redundancy group.
Displays all configured call agent redundancy group parameters.
Displays all configured call agent redundancy group protocols.
Displays all configured call agent redundancy groups.
0
4096
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5
CLI Commands

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vism 3.0

Table of Contents