Table of Contents
Advertisement
delendpts
delendpts
To delete a range of consecutive endpoints on a VISM card, use the delendpts command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
start-endpt
endpt-quantity
Cisco VISM Installation and Configuration Guide
5-254
delendpts start-endpt endpt-quantity
Beginning endpoint number of a range of consecutive endpoints. It can be a value
from one of the following ranges:
•
For template number 1:
For VISM, from 1 to 145
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
–
•
For template number 2:
–
For VISM T1, from 1 to 192
–
For VISM E1, from 1 to 248
•
For template number 3:
For VISM, from 1 to 120
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
–
For template number 4:
•
For VISM-PR, from 1 to 144
–
The quantity of endpoints deleted. It can be a value from one of the following
ranges:
•
For template number 1:
–
For VISM, from 1 to 145
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
For template number 2:
•
For VISM T1, from 1 to 192
–
For VISM E1, from 1 to 248
–
•
For template number 3:
–
For VISM, from 1 to 120
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
For template number 4:
•
For VISM-PR, from 1 to 144
–
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
