Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 164

addendpt
This command sends an RSIP message to each associated call agent indicating that the endpoint is in
service.
Examples The following example adds an endpoint with the number 120, on line 5, DS0 number 5:
addendpt 120 5 5
Related Commands Command
addendpts
delendpt
dspendpt
dspendpts
Cisco VISM Installation and Configuration Guide
5-20
Description
Adds multiple sequential endpoints to a VISM card.
Deletes a specified endpoint on a VISM card.
Displays information about a specified endpoint on a VISM card.
Displays information about all the endpoints on a VISM card.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands