Table of Contents
Advertisement
dspcastimers
Related Commands
Command
addxgcppersistevt
cnfcasdialdelay
cnfcasflashtime
cnfcasglareattrib
cnfcasguardtime
cnfcasoffhooktime
cnfcasonhooktime
cnfcaspackage
dspcasglareattrib
dspcaspackage
Cisco VISM Installation and Configuration Guide
5-314
Description
Adds persistent xGCP events.
Configures the VISM wait time (dial delay) for outpulsing digits to the PBX
after sending an off-hook event.
Configures the minimum and maximum CAS on-hook time periods for
incoming flash hooks on a specified endpoint.
Configures the direction of CAS calls and the glare policy for a specified
endpoint.
Configures the CAS guard time for an endpoint.
Configures a minimum presence time, on an endpoint, for a CAS off-hook
pattern to be recognized as an off-hook signal.
Configures a minimum presence time, on an endpoint, for a CAS on-hook
pattern to be recognized as an on-hook signal.
Configures MGCP packages to notify persistent observed CAS events in the
context of incoming and outgoing CAS calls on a specified endpoint.
Displays the direction of CAS calls and the glare policy for a specified
endpoint.
Displays the MGCP packages configured to notify persistent observed CAS
events in the context of incoming and outgoing CAS calls on a specified
endpoint.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
