Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 505

Chapter 5 CLI Commands
Related Commands Command
addendpt
addendpts
addln
cnfcasendpt
cnflnsig
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Description
Adds an endpoint on a VISM card.
Adds a consecutive number of endpoints to a VISM card.
Adds a T1 or E1 line to a VISM card.
Associates an endpoint with a CAS variant.
Configures the signaling mode for a VISM card line.
Cisco VISM Installation and Configuration Guide
dsplinecasbits
5-361