Table of Contents
Advertisement
Chapter 5
CLI Commands
dspds0musicthreshold
To display the music on-hold threshold value for a specified DS0, use the dspds0musicthreshold
command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
line-num
ds0-num
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the VISM card line number 1, DS0 number 1 displays the –50 dB
music on-hold threshold configuration value:
dspds0musicthreshold 1 1
Line Number
Ds0 Number
MusicThreshold: -50
Related Commands
Command
cnfds0musicthreshold
cnflnmusicthreshold
cnfmusicthreshold
dsplnmusicthreshold
dspmusicthreshold
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspds0musicthreshold line-num ds0-num
Line number of the channel for which you want to display the DS0 music
on-hold threshold value. It can be in the range from 1 to 8.
DS0 number for which you want to display the music on-hold threshold
value. It can be a value from one of the following ranges:
•
•
: 1
: 1
Description
Configures the music on-hold threshold for a specified DS0.
Configures the music on-hold threshold for all DS0s on a specified line.
Configures the music on-hold threshold value for the current VISM card.
Displays the music on-hold threshold values for the DS0s on a specified
line.
Displays the music on-hold threshold values for the current VISM card.
1 to 24 for T1 lines
1 to 31 for E1 lines
Cisco VISM Installation and Configuration Guide
dspds0musicthreshold
5-345
Advertisement
Table of Contents
