Table of Contents
Advertisement
dspds0gain
dspds0gain
To display the adjustable gain values for a specified DS0, use the dspds0gain command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
line-num
ds0-num
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the adjustable gain values for DS0 1 are displayed:
dspds0gain 2 1
Line Number
Ds0 Number
InputGain
Output Attenuation: 60
Related Commands
Command
cnfds0gain
cnfgain
cnflngain
dspgain
dsplngain
Cisco VISM Installation and Configuration Guide
5-342
dspds0gain line-num ds0-num
Line number of the DS0 for which you want to display the adjustable gain. In the
range from 1 to 8.
DS0 number on which to display adjustable gain. It can be a value from one of the
following ranges:
1 to 24 for T1 lines
•
1 to 31 for E1 lines
•
: 2
: 1
: 0
Description
Configures the adjustable gain for a specified DS0.
Configures the adjustable gain for a VISM card.
Configures the adjustable gain for all DS0s on a specified VISM card line.
Displays the adjustable gain for a specified VISM card.
Displays the adjustable gain for a specified VISM card line.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
