Configuring VISM Features
Type the cnfprofelemvoice command, profile-type, profile-num, codec-type, pvoice-pkt-period, and sid
Step 2
argument values, and press Enter to configure the voice profile element for a specified profile. Specify
the arguments with the following values:
•
profile-type: Refer to the options listed in
profile-num: Refer to the options listed in
•
codec-type argument values:
•
–
–
–
–
–
–
–
–
–
–
–
–
–
•
pvoice-pkt-period (defined in milliseconds):
–
–
–
–
–
–
•
sid:
–
–
–
–
–
Step 3
Type the cnfprofelemvbd command, profile-type, profile-num, codec-type, and vbd-pkt-period
argument values, and press Enter to configure the voiceband data element for a specified profile. Specify
the arguments with the following values:
profile-type—Refer to the options listed in
•
profile-num—Refer to the options listed in
•
•
vbd-codec-type—Refer to the options listed in
•
vbd-pkt-period (defined in milliseconds):
Cisco VISM Installation and Configuration Guide
4-42
1 = G.711u
2 = G.711a
3 = G.726-32k
4 = G.729a
5 = G.729ab
6 = Clear channel (VAD must be off)
7 = G.726-16k
8 = G.726-24k
9 = G.726-40k
11 = G.723.1-H
12 = G.723.1a-H
13 = G.723.1-L
14 = G.723.1a-L
5
10
20
30
40
60
1 = VAD off
2 = VAD on
3 = SID generic
4 = SID 729
5 = SID 723
Chapter 4
Step
1.
Step
1.
Step
1.
Step
1.
Step
2.
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Configuring VISM Features