Table of Contents
Advertisement
Chapter 5
CLI Commands
Related Commands
Command
addtoneplan
cnflnringback
cnflntoneplan
cnflntonetimeout
dellntoneplan
deltoneplan
dsplnringback
dsplntoneplan
dsplntonetimeout
dsptoneplan
dsptoneplans
dsptoneprovplans
dsptoneregionplans Displays a list of all tone plans for the countries and regions whose name
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Description
Adds a tone plan to the current VISM card.
Configures the ringback tone method for a specified line on the current VISM
card.
Assigns a tone plan to a specified VISM card line.
Modifies the timeout periods of all call progress tones supported by VISM on
a specified VISM card line.
Deletes the tone plan configuration of a specified VISM card line.
Deletes a previously added tone plan from the current VISM card.
Displays the ringback tone method for a specified line on the current VISM
card.
Displays the tone plan configuration of a specified VISM card line.
Displays the configured timeout periods for all call progress tones of a
specified VISM card line.
Displays the tone configuration of a specified tone plan—either a
preconfigured (built-in) or user-added tone plan.
Displays the tone configuration of all tone plans—either preconfigured
(built-in) or user-added tone plans.
Displays all user-added (provisional) tone plans.
partially or completely matches the name you supply.
Cisco VISM Installation and Configuration Guide
dsptonebuiltinplans
5-443
Advertisement
Table of Contents
