Chapter 5
CLI Commands
dspsess
To display configuration data about all Primary Rate Interface (PRI) backhaul sessions, use the dspsess
command in the VoIP switching/trunking operating mode.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the current PRI backhaul sessions are displayed:
dspsess
Related Commands
Command
addses
delses
dspses
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspsess
Description
Adds a PRI backhaul session between a VISM card and a call agent.
Deletes a PRI backhaul session.
Displays the configuration data of a PRI backhaul session.
Cisco VISM Installation and Configuration Guide
dspsess
5-425