Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 614

dspxgcpdefpkg
dspxgcpdefpkg
To display the Simple Gateway Control Protocol (SGCP)/Media Gateway Control Protocol (MGCP)
default package, use the dspxgcpdefpkg command in the VoIP switching/trunking operating mode.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples The following example shows that the SGCP/MGCP default package is displayed:
dspxgcpdefpkg
Default package :
Related Commands There are no related commands.
Cisco VISM Installation and Configuration Guide
5-470
dspxgcpdefpkg
T
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands