Table of Contents
Advertisement
cnfcodecparams
Command Modes
VoIP switching
Usage Guidelines
The packetization period parameter is required but the remaining parameters are optional. The
parameters of any codec can be configured regardless of whether the current codec template supports
that codec.
If you are using template 2, the G.726 and G.729 codec types are ignored and replaced with clear
channel.
The G.723.1 codecs are supported for VISM-PR cards and are not supported for VISM cards.
Examples
The following example shows that the codec with identification number 3 is configured with a
packetization period of 20 ms, has the highest priority, is not an IANA registered codec, and is
represented by the string geeseven:
cnfcodecparams 3 20 1 0 geeseven
Related Commands
There are no related commands.
Cisco VISM Installation and Configuration Guide
5-122
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
