Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 622

dspxgcperrcnt
dspxgcperrcnt
To display the Simple Gateway Control Protocol (SGCP)/Media Gateway Control Protocol (MGCP)
error counts for both unsupported protocol versions and unrecognized packets, use the dspxgcperrcnt
command in the VoIP switching/trunking operating mode.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the xGCP error counts for unsupported protocol versions and
unrecognized packets are displayed:
dspxgcperrcnt
Number of msg. for an unsupported protocol version :
Number of unrecognized packets :
Related Commands
There are no related commands.
Cisco VISM Installation and Configuration Guide
5-478
dspxgcperrcnt
0
0
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands