Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 517

Chapter 5 CLI Commands
dsplns
To display all line configuration data for the current VISM card, use the dsplns command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples The following example shows that the configuration data for all lines on the current VISM card are
displayed:
dsplns
Line
----
17.1
17.2
17.3
17.4
17.5
17.6
17.7
17.8
LineNumOfValidEntries: 8
Related Commands Command
addln
cnfln
delln
dspln
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dsplns
Conn Type
Type
----- ------------
RJ-48 dsx1ESF
RJ-48 dsx1ESF
RJ-48 dsx1ESF
RJ-48 dsx1ESF
RJ-48 dsx1ESF
RJ-48 dsx1ESF
RJ-48 dsx1ESF
RJ-48 dsx1ESF
Description
Adds a T1 or E1 line to a VISM card.
Configures line characteristics for a specified line.
Deletes a DS1 line from a VISM card.
Displays the characteristics of a specified line.
Status/Coding Length
---- -------- ---------
Ena/dsx1B8ZS 0-131 ft
Ena/dsx1B8ZS 0-131 ft
Dis/dsx1B8ZS 0-131 ft
Dis/dsx1B8ZS 0-131 ft
Dis/dsx1B8ZS 0-131 ft
Dis/dsx1B8ZS 0-131 ft
Ena/dsx1B8ZS 0-131 ft
Ena/dsx1B8ZS 0-131 ft
Cisco VISM Installation and Configuration Guide
XmtClock Alarm Stats
Source Alarm
-------- ----- -----
LocalTim Yes No
LocalTim Yes No
LocalTim
LocalTim
LocalTim
LocalTim
LocalTim No No
LocalTim No No
dsplns
5-373