dspendpts
dspendpts
To display configuration data about all endpoints on a VISM card, use the dspendpts command in the
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the configuration data for all endpoints on the current VISM card are
displayed:
dspendpts
EndptNum
--------
1
2
3
Related Commands
Command
addendpt
addendpts
delendpt
dspendpt
Cisco VISM Installation and Configuration Guide
5-348
dspendpts
Ena/Speed
--- -----
act/
64k
act/
64k
act/
64k
Description
Adds an endpoint on a VISM card.
Adds multiple consecutive numbers of endpoints to a VISM card.
Deletes a specified endpoint on a VISM card.
Displays configuration data about a VISM card endpoint.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands