Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 598

dspvismdn
dspvismdn
To display the domain name of the current VISM card, use the dspvismdn command in the VoIP
switching/trunking and switched AAL2 PVC operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
Follow standard CLI procedures for this command.
Examples The following example shows that the domain name of the current VISM card is displayed:
dspvismdn
DomainName:
Related Commands Command
cnfvismdn
Cisco VISM Installation and Configuration Guide
5-454
dspvismdn
cisco.com
Description
Configures the current VISM card domain name.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands