Table of Contents
Advertisement
Chapter 5
CLI Commands
clrscrn
To clear the control terminal screen, use the clrscrn command in the VoIP switching/trunking, switched
AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
After you execute this command, only the current command line prompt appears on the screen.
Examples
The following example shows that your control terminal screen is cleared, other than the current
command line prompt:
clrscrn
Related Commands
There are no related commands.
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
clrscrn
Cisco VISM Installation and Configuration Guide
clrscrn
5-63
Advertisement
Table of Contents
