Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 620

Voice interworking service module release 3.0
Table of Contents

Advertisement

dspxgcpendptcons
MGC IP Address
MGC UDP Port
Port in Notified Entity
Protocol Version
Silence Suppression
VAD Timer
CAS Forwarding Backhaul
Triple Redundancy
DTMF forwarding
Local Connection Options (lco string)
Remote Session Descriptor (sdp string)
Timestamp Information:
Display Type
CRCX Ack (CRCX Ack - CRCX)
Time since the CRCX was received
(CRCX Command is not shown since it is used as reference)
Codec List:Codec[1]
Pkt. Period List[1]:Pkt. Period[1]
Pkt. Period Range[1] - Low
Pkt. Period Range[1] - High
Codec List:Codec[2]
Pkt. Period List[2]:Pkt. Period[1]
Pkt. Period Range[2] - Low
Pkt. Period Range[2] - High
Codec List:Codec[3]
Pkt. Period List[3]:Pkt. Period[1]
Pkt. Period Range[3] - Low
Pkt. Period Range[3] - High
LCO Pkt. Period Range - Low
LCO Pkt. Period Range - High
TDM Endpoint Connected to DSP Channel
DSP Channel Connected to Network Endpoint
Related Commands
Command
delxgcpcon
dspxgcpcids
dspxgcpcon
dspxgcpcons
dspxgcpendpt
dspxgcpendpts
Cisco VISM Installation and Configuration Guide
5-476
= Terminating
= 10.000000000 ms
= 210.280000000 sec
Description
Deletes an xGCP connection specified by the xGCP connection identification
number.
Displays the LCN, CID, xGCP connection ID, endpoint name, and call ID
corresponding to each call agent established AAL2 connection on the gateway.
Displays the attributes associated with a call agent established connection.
Displays the xGCP connection ID, endpoint name and call ID corresponding to
each call agent established connection on the gateway.
Displays the xGCP endpoint names corresponding to each endpoint number.
Displays the xGCP endpoint name corresponding to each endpoint added using the
addendpt command or the SNMP equivalent.
= Unknown
= 2427
= FALSE
= MGCP 0.1
= TRUE
= 250
= 0
= 1
= 0
= L:e:on
=
= PCMU
= 10 ms
= 10 ms
= 10 ms
= PCMA
= 10 ms
= 10 ms
= 10 ms
= CCD
= 10 ms
= 10 ms
= 10 ms
= 0 ms
= 0 ms
= TRUE
= TRUE
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5
CLI Commands

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vism 3.0

Table of Contents