Table of Contents
Advertisement
cnfcasxgcp
cnfcasxgcp
To configure channel associated signaling (CAS) variant retransmission parameters, use the cnfcasxgcp
command in the VoIP switching/trunking and switched AAL2 PVC operating modes.
Syntax Description
var-name
retrans-time
start-retrans-time
retrans-num
Command Modes
VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the var1 CAS variant is configured for 100 ms retransmission time,
100 ms initial retransmission time, and up to two retransmission attempts:
cnfcasxgcp var1 100 100 10 2
Related Commands
Command
addcasvar
delcasvar
dspcasvar
Cisco VISM Installation and Configuration Guide
5-114
cnfcasxgcp var-name retrans-time start-retrans-time retrans-num
Name of the CAS variant to be configured with retransmission parameters; a
text string of 1 to 64 alphanumeric characters.
The retransmission time (defined in milliseconds). It can be in the range from
10 to 10000.
The initial retransmission time (defined in milliseconds). It can be in the range
from 10 to 10000.
Maximum number of retransmission retries. It can be in the range from 0 to 10.
Description
Adds a CAS variant to a VISM card.
Deletes a CAS variant from a VISM card.
Displays information about CAS variants for a given variant name.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
