Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 466

dspcd
dspcd
To display the current VISM card's configuration, status, and hardware and firmware configuration data,
use the dspcd command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
The VISM card configuration data displayed includes serial number and hardware and firmware revision
levels.
Examples
The following example shows that the current VISM card configuration data is displayed:
dspcd
ModuleSlotNumber:
FunctionModuleState:
FunctionModuleType:
FunctionModuleSerialNum:
FunctionModuleHWRev:
FunctionModuleFWRev:
FunctionModuleResetReason: ?
LineModuleType:
LineModuleState:
mibVersionNumber:
configChangeTypeBitMap:
pcb part no - (800 level): 800-xxxxx-xx
pcb part no - (73 level):
Fab Part no - (28 level):
PCB Revision:
Daughter Card Information:
Daughter Card Serial Number: xxxxxxxxxxx
pcb part no - (73 level):
Fab Part no - (28 level):
PCB Revision:
Related Commands Command
dspcds
version
Cisco VISM Installation and Configuration Guide
5-322
dspcd
Description
Displays a list of chassis card types, with associated slot numbers, card status, alarm
status, and redundancy status.
Displays version-related information for a VISM card.
17
Active
VISM-8T1
xxxxxxxxxx
0.0
1.5.0_11Nov01_2
LM-RJ48-8T1
Present
21
CardCnfChng, LineCnfChng
73-xxxxx-xx
28-xxxxx-xx
08
73-xxxxx-xx
28-xxxxx-xx
04
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands