cnfcodecneg
cnfcodecneg
To configure the priority order of the lists of codec list priority order, use the cnfcodecneg command in
the VoIP switching/trunking operating mode.
Syntax Description
codec-priority
Command Modes
VoIP switching/trunking
Usage Guidelines
Codec lists include the following:
•
•
•
Examples
The following example shows that the LCO list is the first priority, SDP data list is the second, and the
list from the local MIB is the last priority:
cnfcodecneg 1
Related Commands
There are no related commands.
Cisco VISM Installation and Configuration Guide
5-120
cnfcodecneg codec-priority
The codec list priority scheme. It can be one of the following values:
1 = LCO list, remote SDP data list, local MIB
•
2 = LCO list, local MIB, remote SDP data list
•
3 = Remote SDP data list, LCO list, local MIB
•
4 = Remote SDP data list, local MIB, LCO list
•
•
5 = Local MIB, LCO list, remote SDP data list
•
6 = Local MIB, remote SDP data list, LCO list
Call agent provided list in a local connection option (LCO)
Remote gateway provided list in the Session Description Protocol (SDP) data
Local MIB provided list
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands