Table of Contents
Advertisement
dspsarcnts
dspsarcnts
To display the segmentation and reassembly (SAR) counter values for a VISM card, use the dspsarcnts
command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the SAR counter values for the current VISM card are displayed:
dspsarcnts
Related Commands
Command
dspsarcnt
Cisco VISM Installation and Configuration Guide
5-420
dspsarcnts
Description
Displays the SAR counter values for a specified channel.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
