Chapter 5
CLI Commands
dsplapds
To display configuration data about all Link Access Protocol for ISDN D channels (LAPDs), use the
dsplapds command in the VoIP switching/trunking operating mode.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the configuration data for all LAPDs is displayed:
dsplapds
Line number
------------------------------------------------
Related Commands
Command
addlapd
dellapd
dsplapd
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dsplapds
DS0 number
1
1
Description
Adds an LAPD.
Deletes an LAPD.
Displays configuration data about an LAPD.
Lapd Application Type
PRI
Cisco VISM Installation and Configuration Guide
dsplapds
5-353