Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 524

dspmaxmgcs
dspmaxmgcs
To display the maximum number of Media Gateway Controllers (MGCs) that can be configured on the
current card, use the dspmaxmgcs command in the VoIP switching/trunking and switched AAL2 PVC
operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the maximum number of MGCs that can be configured on the current
card is displayed:
dspmaxmgcs
Maximum number of MGCs: 8
Related Commands
There are no related commands.
Cisco VISM Installation and Configuration Guide
5-380
dspmaxmgcs
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands