Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 208

clrslipcnt
clrslipcnt
To clear current clock slip counters for a specified VISM card line, use the clrslipcnt command in the
VoIP switching/trunking, switched AAL1 SVC, switched AAL2 SVC, switched AAL2 PVC, AAL2
trunking, VoIP and switched ATM AAL1 SVC trunking operating modes.
Syntax Description
line-num
Command Modes VoIP switching/trunking, switched AAL1 SVC, switched AAL2 SVC, switched AAL2 PVC, AAL2
trunking, VoIP and switched ATM AAL1 SVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples
The following example shows that the current clock slip counters for line 3 of the current VISM card are
cleared:
clrslipcnt 3
Line 3 Slip Counters:
Uncontrolled Slip:
Frame Slip:
Related Commands Command
dspslipcnt
Cisco VISM Installation and Configuration Guide
5-64
clrslipcnt line-num
Line number of the DS1 line for which you want to clear current clock slip counters.
It can be in the range from 1 to 8.
Tx Slip
0
0
Description
Displays the current clock slip counters for a specified VISM card line.
Rx Slip
0
2
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands