Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 494

dspgwstate
dspgwstate
To display the current user-configured service state of the gateway, use the dspgwstate in the VoIP
switching/trunking operating mode.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines
The following possible states are displayed by this command:
•
•
Examples
The following example shows that the user-configured gateway service states—the command out of
service administration state and the alarm operational state—are displayed:
dspgwstate
Admin State : Command_Out_Of_Service
Oper. State : Alarm
Related Commands
There are no related commands.
Cisco VISM Installation and Configuration Guide
5-350
dspgwstate
Admin States:
In service
–
Command out of service
–
Pending out of service
–
Operational States:
– Alarm
– OK
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands