Table of Contents
Advertisement
Chapter 5
CLI Commands
cnfsrcppeergrpparam
To modify the Simple Resource Control Protocol (SRCP) heartbeat interval and maximum User
Datagram Protocol (UDP) size for a specified call agent redundancy group, use the
cnfsrcppeergrpparam command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2
trunking operating modes.
Syntax Description
red-mgc-group
hbeat-int
max-udp-size
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that call agent redundancy group number 3 is configured with a 250-ms
SRCP heartbeat interval and 50000-byte maximum UDP size:
cnfsrcppeergrpparam 3 250 50000
Related Commands
Command
addmgcgrpentry
addmgcgrpprotocol
cnfmgcgrpentry
cnfmgcgrpparam
cnfsrcppeer
delmgcgrpentry
delmgcgrpprotocol
dspmgcgrpparams
dspmgcgrpprotocols
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
cnfsrcppeergrpparam red-mgc-group hbeat-int max-udp-size
Call agent redundancy group number. It can be in the range from 1 to 8.
Interval between heartbeats (defined in milliseconds). It can be one of the
following values:
•
•
Maximum allowable UDP size. It can be in the range from 4095 to 65535.
Description
Configures call agents as part of an MGC redundancy group and assigns a
priority value for a call agent.
Associates a call agent redundancy group to a gateway control protocol.
Modifies the call agent priority level of a call agent within a call agent
redundancy group.
Modifies a call agent redundancy group state change notification policy
and priority level.
Configures the SRCP parameters when SRCP is the selected protocol for
communication between the VISM card and call agent.
Deletes a call agent from a call agent redundancy group.
Deletes an MGCP from a specified call agent redundancy group.
Displays all configured call agent redundancy group parameters.
Displays all configured call agent redundancy group protocols.
0
In the range from 100 to 65535
Cisco VISM Installation and Configuration Guide
cnfsrcppeergrpparam
5-215
Advertisement
Table of Contents
