Table of Contents
Advertisement
Chapter 5
CLI Commands
cnfprofneg
To configure the profile list priority order, use the cnfprofneg command in the switched AAL2 PVC
operating mode.
Syntax Description
codec-priority
Command Modes
Switched AAL2 PVC
Usage Guidelines
This command determines which list to use for determining the relative profile preferences.
Examples
The following example shows that the codec list priority configuration uses the LCO list first, the remote
SDP data list second, and the local MIB last:
cnfprofneg 1
Related Commands
Command
dspvismparam
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
cnfprofneg codec-priority
The codec list priority scheme. It can be one of the following values:
1 = Local connection options (LCO) list, remote Session Descriptor Protocol
•
(SDP) data list, local MIB
2 = LCO list, local MIB, remote SDP data list
•
3 = Remote SDP data list, LCO list, local MIB
•
4 = Remote SDP data list, local MIB, LCO list
•
•
5 = Local MIB, LCO list, remote SDP data list
•
6 = Local MIB, remote SDP data list, LCO list
Description
Displays the current VISM card configuration.
Cisco VISM Installation and Configuration Guide
cnfprofneg
5-193
Advertisement
Table of Contents
