Table of Contents
Advertisement
Chapter 5
CLI Commands
delanndynamic
To delete an announcement file and associated codec type from the temporary announcement files
currently saved in the VISM card, use the delanndynamic command in the VoIP switching operating
mode.
Syntax Description
ann-filename
codec-type
Command Modes
VoIP switching
Usage Guidelines
This command does not report an error if the requested file identified by the ann-filename argument is
not found.
The G.723.1 codecs are supported for VISM-PR cards and are not supported for VISM cards.
Examples
The following example shows that the femalezero1 announcement file and its associated codec type of
G.726-40k is deleted from the temporary announcement files currently saved in the VISM card:
delanndynamic femalezero1 9
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
delanndynamic ann-filename codec-type
Announcement file filename. It can be from 1 to 64 alphanumeric characters,
including the following symbols—period (.), forward slash (/), underscore (_),
and hyphen (-).
The type of coding/decoding to be performed on the data stream. It can be one of
the following values:
•
1 = G.711u
•
2 = G.711a
3 = G.726-32k
•
4 = G.729a
•
5 = G.729ab
•
7 = G.726-16k
•
8 = G.726-24k
•
•
9 = G.726-40k
•
11 = G.723-H
•
12 = G.723a-H
•
13 = G.723.1-L
14 = G.723.1a-L
•
Cisco VISM Installation and Configuration Guide
delanndynamic
5-241
Advertisement
Table of Contents
