dspco4timer
dspco4timer
To display the bearer continuity test CO4 timer value, use the dspco4timer command in the VoIP
switching/trunking operating mode.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the bearer continuity test CO4 timer is set at 1000 ms:
dspco4timer
CO4 timer value:
Related Commands
Command
cnfco4timer
dspvismparam
Cisco VISM Installation and Configuration Guide
5-326
dspco4timer
1000
Description
Configures the bearer continuity test CO4 timer value.
Displays the current VISM card configuration.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands