Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 540

dsprscprtn
dsprscprtn
To display configuration data about the resource partition which you created with the addrscprtn
command, use the dsprscprtn command in the VoIP switching/trunking, switched AAL2 PVC, and
AAL2 trunking operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the configuration data of the resource partition created with the
addrscprtn command is displayed:
dsprscprtn
vismResPartPortNum:
vismResPartCtrlrNum:
vismResPartRowStatus:
vismResPartNumOfLcnAvail:
vismResPartLcnLow:
vismResPartLcnHigh:
vismResPartIngrPctBW:
vismResPartEgrPctBW:
vismResPartCtrlrID:
Related Commands Command
addrscprtn
Cisco VISM Installation and Configuration Guide
5-396
dsprscprtn
Description
Adds a resource partition for a virtual port.
1
par
add
72
32
279
100
100
2
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands