Table of Contents
Advertisement
Chapter 5
CLI Commands
cnft38params 2 3 28 20 3 0 2 1 1 500 4000
Related Commands
Command
cnfcodectmpl
cnft38fxlco
cnft38nsetimeout
dspcodectmpls
dspt38fxlco
dspt38fxlcos
dspt38nsetimeout
dspt38nsetimeouts
dspt38params
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Description
Assigns a codec template to an entire VISM card.
Configures the fax handling instructions for a specified line.
Configures a specified line with a length of time in which to wait for a remote
acknowledgment of the offer to switch to fax transfer mode.
Displays all entries in the codec template table.
Displays the fax handling instructions configured for a specified line.
Displays the fax handling instructions for all lines on the current VISM card.
Displays a specified configured line with a length of time in which to wait for
a remote acknowledgment of the offer to switch to fax transfer mode.
Displays all configured lines with a length of time in which to wait for a remote
acknowledgment of the offer to switch to fax transfer mode.
Displays the T.38 fax transfer parameters for a specified line.
Cisco VISM Installation and Configuration Guide
cnft38params
5-223
Advertisement
Table of Contents
