Table of Contents
Advertisement
cnfcaspackage
Command
addxgcppersistevt
cnfcasflashtime
cnfcasglareattrib
cnflndigitorder
delxgcppersistevt
dspcasglareattrib
dspcaspackage
dspcastimers
dsplndigitorder
Cisco VISM Installation and Configuration Guide
5-108
Description
Adds persistent xGCP events.
Configures the minimum and maximum CAS on-hook time periods for
incoming flash hooks on a specified endpoint.
Configures the direction of CAS calls and the glare policy for a specified
endpoint.
Assigns the order in which ANI digits and DNIS digits are dialed during an
outgoing FGD call on the endpoints of a specified VISM card line.
Deletes a persistent xGCP event.
Displays the direction of CAS calls and the glare policy for a specified
endpoint.
Displays the MGCP packages configured to notify persistent observed CAS
events in the context of incoming and outgoing CAS calls on a specified
endpoint.
Displays the currently configured CAS timers for a specified endpoint.
Displays the order in which ANI digits and DNIS digits are dialed during an
outgoing FGD call on the endpoints of a specified VISM card line.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
