Table of Contents
Advertisement
dsplapd
Command
cnflntrunkcond
cnfrtpcon
cnfrudptrunkrmtip Modifies the remote IP address of VISM used in the ISDN PRI backhaul RUDP
dellapd
dellapdtrunk
delrtpcon
delrudptrunk
dsplapds
dsplapdtrunkpvc
dsplapdtrunks
dsprtpcnt
dsprtpcon
dsprtpcons
dsprudptrunk
dsprudptrunks
Cisco VISM Installation and Configuration Guide
5-352
Description
Enables or disables line conditioning on a VISM card line if a network alarm
is encountered.
Modifies an existing static RTP VoIP trunking connection.
trunk for a specified session.
Deletes an LAPD.
Deletes an LAPD configured line.
Deletes a static RTP VoIP trunking connection.
Deletes an ISDN PRI backhaul RUDP session that is associated with an LAPD.
Displays configuration data about all LAPDs.
Displays the assigned PVC trunk type that carries LAPD trunk messages for
the current VISM card.
Displays the configuration data of all LAPD trunks.
Displays the bearer counters (statistics) for a specific RTP VoIP trunking
connection.
Displays the configuration data of a specific static RTP VoIP trunking
connection.
Displays the configuration data of all static RTP VoIP trunking connections.
Displays the configuration data of a specified ISDN PRI backhaul RUDP
session.
Displays the configuration data of all ISDN PRI backhaul RUDP sessions.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
