dspcarddsp
dspcarddsp
To display all card level configuration parameters for both echo cancellation (ECAN) and voice
compression DSPs, use the dspcarddsp command in the VoIP switching/trunking, switched AAL2 PVC,
and AAL2 trunking operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
The packetization period and default type of service parameters apply to the VoIP switching/trunking
operating mode only.
Examples
The following example shows that the card level configuration parameters for ECAN and voice
compression DSPs are displayed:
dspcarddsp
IdlePattern:
IdleDirection:
PacketSize:
DB loss:
Jitter buffer mode:
Jitter buffer size:
Adaptive Gain Control:
Related Commands
There are no related commands.
Cisco VISM Installation and Configuration Guide
5-306
dspcarddsp
0x7f or 0xff
Both
80 bytes
sixdb
fixed
forty msec
off
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands