Table of Contents
Advertisement
delccs
delccs
To delete the association between a common channel signaling (CCS) DS0 channel and the
corresponding virtual channel, use the delccs command in the AAL2 trunking operating mode.
Syntax Description
line-num
ds0-num
Command Modes
AAL2 trunking
Usage Guidelines
The original association is configured with the addccs command.
Examples
The following example shows that the CCS channel on line 2, DS0 12 is deleted:
delccs 2 12
Related Commands
There are no related commands.
Cisco VISM Installation and Configuration Guide
5-246
delccs line-num ds0-num
Line number of the channel, in the range from 1 to 8.
DS0 number of the channel. It can be a value from one of the following ranges:
1 to 24 for T1 lines
•
•
1 to 31 for E1 lines
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
