Table of Contents
Advertisement
Chapter 5
CLI Commands
dspalms
To display the alarms for a specified VISM card line type, use the dspalms command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
line-type
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the alarms for the T1 line type are displayed:
dspalms -ds1
Line
----
5.1
5.2
5.3
Related Commands
Command
dspalm
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspalms line-type
Line type, -ds1 = T1 or E1 lines.
AlarmState
StatisticalAlarmState
-----------
---------------------
No Alarms
No Statistical Alarms
No Alarms
No Statistical Alarms
No Alarms
No Statistical Alarms
Description
Displays the alarms associated with a specified line.
Cisco VISM Installation and Configuration Guide
dspalms
5-287
Advertisement
Table of Contents
