Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 478

dspcons
dspcons
To display channel configuration data for all configured connections on a VISM card, use the dspcons
command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples The following example shows that channel configuration data for all connections on the current VISM
card are displayed:
dspcons
ConnId
-------
datamvr2.5.1.0.135
datamvr2.5.1.0.136
ChanNumNextAvailable:
Related Commands Command
addcon
cnfcon
dspcon
Cisco VISM Installation and Configuration Guide
5-334
dspcons
ChanNum Status
------- ------
135
136
137
Description
Adds a PVC connection between a VISM card and any SM or PXM card.
Configures a connection between a VISM card and a Cisco MGX 8000 Series
platform PXM card.
Displays the parameters for a specified channel.
Preference Protection
---------- ----------
Add 1 unprotected
Add 1 unprotected
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5
Active Locking
------- --------
unknown unlock
unknown unlock
CLI Commands