Table of Contents
Advertisement
Chapter 5
CLI Commands
cnfprofelemvbd
To configure the voiceband data (VBD) profile element for a profile, use the cnfprofelemvbd command
in the switched AAL2 PVC operating mode.
Syntax Description
profile-type
profile-num
vbd-codec-type
vbd-pkt-period
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
cnfprofelemvbd profile-type profile-num vbd-codec-type vbd-pkt-period
The profile type to be used for the CID. It can be one of the following values:
1 = International Telecommunication Union (ITU) I.366.2
•
3 = Custom
•
Number of the profile. It can be one of the following values:
•
1 = ITU profile type
•
2 = ITU profile type
•
3 = ITU profile type
7 = ITU profile type
•
8 = ITU profile type
•
12 = ITU profile type
•
100 = custom profile type
•
101 = custom profile type
•
•
110 = custom profile type
•
200 = custom profile type
The type of coding/decoding to be performed on the data stream. It can be one of
the following values:
1 = G.711u
•
2 = G.711a
•
3 = G.726-32k
•
6 = Clear channel (VAD must be off)
•
7 = G.726-16k
•
•
8 = G.726-24k
•
9 = G.726-40k
•
11 = G.723.1-H
•
13 = G.723.1-L
Packetization period (defined in milliseconds). It can be one of the following
values:
5
•
10
•
30
•
Cisco VISM Installation and Configuration Guide
cnfprofelemvbd
5-189
Advertisement
Table of Contents
