Chapter 5
CLI Commands
dspport
To display configuration data about the virtual port that you created with the addport command, use the
dspport command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating
modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the configuration data about the virtual port created with the addport
command is displayed:
dspport
vismPortNum:
vismPortRowStatus:
vismPortSpeed:
vismPortState:
Related Commands
Command
addport
delport
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspport
Description
Adds a virtual port between a VISM and PXM cards.
Deletes a virtual port between a VISM and PXM cards.
1
add
50000
active
Cisco VISM Installation and Configuration Guide
dspport
5-393