Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 626

dspxgcppersistevts
dspxgcppersistevts
To display all active persistent xGCP events, use the dspxgcppersistevts command in the VoIP
switching/trunking and switched AAL2 PVC operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
Follow standard CLI procedures for this command.
Examples The following example shows that the active persistent xGCP events are displayed:
dspxgcppersistevts
1
2
3
Related Commands Command
addxgcppersistevt
delxgcppersistevt
Cisco VISM Installation and Configuration Guide
5-482
dspxgcppersistevts
l/hd
l/hu
r/co4
Description
Adds persistent xGCP events.
Deletes a persistent xGCP event.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands