Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 616

dspxgcpdetailcnts
dspxgcpdetailcnts
To display Simple Gateway Control Protocol (SGCP)/Media Gateway Control Protocol (MGCP) details
of message statistics exchanged between VISM and all known call agents, use the dspxgcpdetailcnts
command in the VoIP switching/trunking operating mode.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the SGCP/MGCP details of message statistics exchanged between
VISM and all known call agents are displayed:
dspxgcpdetailcnts
IP Address
CRCX Count
CRCX Fail Count
MDCX Count
MDCX Fail Count
DLCX Received Count
DLCX Received Fail Count
DLCX Sent Count
DLCX Sent Fail Count
RQNT Count
RQNT Fail Count
Notify Count
Notify Fail Count
Audit Endpoint Count
Audit Endpoint Fail Count
Audit Connection Count
Audit Connection Fail Count
RSIP Count
RSIP Fail Count
Related Commands Command
dspxgcpdetailcnt
Cisco VISM Installation and Configuration Guide
5-472
dspxgcpdetailcnts
Description
Displays SGCP/MGCP details of message statistics exchanged between VISM
and a specified call agent.
: 2.2.2.2
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 4
: 4
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands