Table of Contents
Advertisement
addcasvar
Examples
The following example shows that a wink start CAS variant called casvar is added to a VISM card based
upon information contained in the wink_did_dod.o file, which is located in the internal (built-in)
location:
addcasvar casvar wink_did_dod.o 2
Related Commands
Command
cnfcasvar
delcasvar
dspcasvar
dsplnringback
Cisco VISM Installation and Configuration Guide
5-6
Description
Configures CAS variant and CAS timing parameters for a variant already
created with the addcasvar command.
Deletes a CAS variant.
Displays information about CAS variants for a given variant name.
Displays the ringback tone method for a specified line on the current VISM
card.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
