Table of Contents
Advertisement
dspmngcidcnt
dspmngcidcnt
To display the managed channel identifier (CID) count for a specified endpoint, use the dspmngcidcnt
command in the switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
endpt-num
Command Modes
Switched AAL2 PVC and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the managed CID counts for endpoint number 1 are displayed:
dspmngcidcnt 1
EndptNum:
Lcn:
Cid:
SentPkts:
RcvdPkts:
SentOctets:
RcvdOctets:
LostPkts:
Jitter:
Latency:
Cisco VISM Installation and Configuration Guide
5-388
dspmngcidcnt endpt-num
The endpoint number for which you want to display the managed CID count. It can
be a value from one of the following ranges:
•
For template number 1:
For VISM, from 1 to 145
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
–
•
For template number 2:
–
For VISM T1, from 1 to 192
–
For VISM E1, from 1 to 248
•
For template number 3:
For VISM, from 1 to 120
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
–
For template number 4:
•
For VISM-PR, from 1 to 144
–
1
35
10
15277688
0
654128294
0
0
0
0
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
