Table of Contents
Advertisement
delmgc
delmgc
To delete a call agent from a VISM card's list of configured call agents, use the delmgc command in the
VoIP switching/trunking and switched AAL2 PVC operating modes.
Syntax Description
mgc-num
Command Modes
VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the call agent identified by the number 3 is deleted:
delmgc 3
Related Commands
Command
cnfmgcgrpparam
dspmgcs
Cisco VISM Installation and Configuration Guide
5-262
delmgc mgc-num
A number by which the call agent is identified, as displayed by the dspmgcs
command, in the range from 1 to 8.
Description
Modifies a call agent redundancy group state change notification policy and
priority level.
Displays configuration data on all configured call agents.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
