Table of Contents
Advertisement
cnfcalea
cnfcalea
To enable or disable the Communications Assistance for Law Enforcement Act (CALEA) feature on the
current VISM card, use the cnfcalea command in the VoIP switching/trunking, switched AAL2 PVC,
and AAL2 trunking operating modes.
Syntax Description
calea-enable
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
You must ensure that you are using the VISM software version that supports CALEA in order to use the
CALEA feature. The CALEA implementation supports the CALEA law intercept confirmation interface.
Examples
The following example shows that the CALEA feature is enabled on the current VISM card:
cnfcalea 1
Related Commands
Command
addcon
cnfcon
dspcalea
dspvismparam
Cisco VISM Installation and Configuration Guide
5-88
cnfcalea calea-enable
Enables or disables the CALEA feature. It can be one of the following values:
•
1 = On
2 = Off (Default)
•
Description
Adds a PVC connection between a VISM card and any SM or PXM card.
Configures a connection between a VISM card and an MGX 8000 Series
platform PXM card.
Displays the CALEA feature configuration status of the current VISM card.
Displays the current VISM card configuration.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
