Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 609

Chapter 5 CLI Commands
dspxgcpcnts
To display the Simple Gateway Control Protocol (SGCP)/Media Gateway Control Protocol (MGCP)
message statistics for all known call agents, use the dspxgcpcnts command in the VoIP
switching/trunking operating mode.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the SGCP/MGCP messages statistics for all known call agents are
displayed:
dspxgcpcnts
IP
---------
2.2.2.2
Related Commands Command
dspxgcpcnt
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspxgcpcnts
success msg
----------- ----------
0
Description
Displays the SGCP/MGCP message statistics for a specified call agent.
fail msg
4
Cisco VISM Installation and Configuration Guide
dspxgcpcnts
5-465