Table of Contents
Advertisement
deldn
deldn
To delete a domain name, use the deldn command in the VoIP switching/trunking and switched AAL2
PVC operating modes.
Syntax Description
domain-name-num
Command Modes
VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
If the domain name you want to delete is the last entry in the domain table and if the domain name exists
in the list of call agents that VISM maintains (as displayed by the dspmgcs command), deletion is not
allowed.
You must manually delete all statistically provisioned IP addresses for the domain name before you can
delete the domain name.
You should not delete a domain name if it is used as one of the following:
•
•
•
•
Examples
The following example shows that the domain name represented by domain name number 12 is deleted:
deldn 12
Related Commands
Command
adddn
adddnip
cnfdn
cnfdnssrvr
deldnip
dspdnallips
dspdnips
dspdns
dspdnssrvr
Cisco VISM Installation and Configuration Guide
5-250
deldn domain-name-num
Domain name number. It can be in the range from 1 to 11.
Media Gateway Controller (MGC)
Trivial File Transfer Protocol (TFTP) server
Domain name server (DNS)
Announcement server
Description
Adds a domain name (call agent name) and optionally configures the
resolution type of the domain name.
Adds the IP addresses for a domain name that you added by using the adddn
command.
Configures the resolution type of a specified domain name.
Designates a domain name as a DNS.
Deletes a statistically provisioned IP address of a domain name.
Displays all statistically provisioned IP addresses and externally resolved IP
addresses for all domain names configured on the current VISM card.
Displays all statistically provisioned and externally resolved IP addresses
configured for a specified domain name.
Displays the configuration data of all domain names of a call agent.
Displays the domain name of the configured DNS of the current VISM card.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
